Alfadur Plus
Alfadur Plus is a high strength formulated plaster used in the ceramic industry to produce moulds for medium pressure casting.
Plaster
| Chamotte |
| Al2O3 content (%) |
|
Open porosity (%) |
|
| Vitreous phase (%) |
|
Pyroscopic resistance (°C) |
|
| Apparent density |
|
|
|
| Plaster |
| Chemical composition |
CaSO4½H2O |
Linear expansion (%) |
0.18 |
| Chemical name |
Calcium sulphate hemihydrate |
Colorimeter L (L* value) |
|
| Plaster to water mix ratio (by weight) |
100/30 |
Colorimeter a (a* value) |
|
| Plaster to water ratio (by weight) |
3.33:1 |
Colorimeter b (b* value) |
|
| Water to plaster ratio (by weight) |
30 |
Colour |
off-white |
| Fluidity / spread (cm) |
|
Sieve analysis (Mesh size & % weight retained) |
+ 200 microns : |
| Initial setting time (minutes) |
19 - 24 |
Bulk density loose (kg / m³) |
|
| Final setting time (minutes) |
|
Bulk density compacted (kg / m³) |
|
| Wet compressive strength MPa |
|
Apparent bulk density (g/cm³) |
1200 |
| Dry compressive strength MPa |
43.6 |
Pore volume (%) |
21 |
| Flexural strength MPa |
11.5 |
Start of warming phase (minutes) |
|
| Brinell hardness MPa |
155 |
End of warming phase (minutes) |
|
| Hardness shore D |
|
Shelf life (Months) |
6 |
|
|
|
|
| Refractory Investments |
| Water used (%) |
|
Liquid Density |
|
| Mixing Time (minutes) |
|
Linear Expansion 1 hour after setting (%) |
|
| Working / Casting Time (minutes) |
|
Linear Expansion 2 hours after setting (%) |
|
| Initial Setting Time (minutes) |
|
Shelf Life (months) |
|
|
|
| Gypsum |
| Chemical composition |
|
pH |
|
| Chemical name |
|
Solubility of Gypsum (g/ litre) |
|
| Minimum Gypsum purity (%) |
|
Bulk density loose(kg/cm³) |
|
| Sieve analysis (mesh size & % weight retained) |
|
Bulk density compacted (kg/cm³) |
|
| Colorimeter L (L* value) |
|
Apparent bulk density |
[] |
| Colorimeter a (a* value) |
|
Gypsum hardness (MOH scale) |
|
| Colorimeter b (b* value) |
|
Shelf life |
|
| Colour |
| |
Please refer to product data sheets for futher information