Products exist in different colours, working times and temperature curves, adapted to different skin types and a wide
range of treatments:
• independent laboratory testing : toxicological evaluation, safety and acute skin tolerance assessment
• authorised cosmetic ingredients (no preservatives, allergenic materials, animal or genetically modified plant
ingredients)
• no animal testing
• gentle temperature curves, well tolerated by the skin
• pleasant creamy texture easy to mix and apply
• thermal action dilates the pores optimising penetration of treatments, contributes to skin and muscle
relaxation and comfort, and stimulates blood flow contributing to cell regeneration
• masks may be personalised by adding serums oils or lotions during preparation.
Pro-Esthétique masks are applied during treatments incorporating several phases.
Specific instructions on mask preparation and application are available on product data sheets. Please refer to Material Safety Data Sheets and technical data sheets prior to using any products in contact with the skin
• Cleansing
• Application of treatment creams and serums
• Massage
• Mask preparation and application
1. Prior to applying the mask, it is recommended to apply a generous layer of treatment cream to the
skin.
2. Apply a woven mask or pre-cut gauze support on the treatment area. For facial use, leave holes for
breathing, and apply cotton pads to the eye and mouth area.
3. Pour the measured volume of clean, warm water (20 -30°C) into a clean bowl.
4. Slowly sprinkle the weighed quantity of powder across the surface of the water and allow to soak for
30 seconds. Stir vigorously with a spatula for 30 to 60 seconds to obtain a uniform creamy, lumpfree
mix.
5. Using a spatula apply the mask paste in a thick even layer (3-5 cm) onto the woven mask / gauze
support.
6. Do not apply directly to eyes, nose, or mouth.
7. Leave the mask to dry for 25 minutes. The mask will gently emit heat. The thickness of layer affects
the maximum temperature obtained.
It is recommended to use layers less than 5 cm thick (to avoid temperatures above 55 ° C).
8. Gently remove the mask, by first peeling off at the edges. Following the mask phase it is
recommended to cleanse and tone the treatment area and apply a final treatment product.
• Final treatment phase