Almod 60 is a formulated plaster used in ceramics to produce working moulds for the slip casting of tableware and sanitaryware
Excellent for slip casting sanitaryware
Good balance between mechanical properties and absorption capability
| Propriétés physiques | |
|---|---|
| Densité apparente (g/cm³) | 800 |
| Analyse granulométrique (refus en %) |
< 0.04%à 200 µm 4% à 90 µm |
| Comportement mécanique | |
|---|---|
| Dureté Brinell (MPa) | 21 |
| Résistance à la compression à sec (Mpa) | 12 |
| Résistance à la flexion (MPa) | 5,6 |
| Porosité (%) | 50 |
| Caractéristiques chimiques | |
|---|---|
| Composition chimique | CaSO4.1/2H2O |
| Paramètres de prise | |
|---|---|
| Début de prise (mn) | 10-15 |
| Expansion linéaire (%) | 0,2 |
| Fluidité anneau Vicat (cm) | 17-22 |
| Taux de gâchage | |
|---|---|
| Rapport plâtre/eau (en masse) | 1.45:1 |
| Rapport eau/plâtre (en masse) | 69% |
The recommended plaster to water ratio is between 1.20:1 and 1.45:1, with a mixing time of approx. 2 to 4 minutes, depending on batch size and plaster shop process.Water and Plaster must be measured carefully to ensure constant performances.The precise consistency to use will need to be adjusted to suit the individual application. Changes to plaster to water ratio will influence product performance particularly setting time, strength and permeability.
Conditionnement disponible : 25 kg, 50 kg
Durée de conservation : 6 months
Conditionnement disponible : 1 T
Durée de conservation : 6 months
Conditionnement disponible : 25 T
Durée de conservation : Technical properties noted are at receipt of goods.