Alfamolde 3 is a high strength formulated plaster. His very high level of alpha base plaster is bringing high mechanical properties but controlled in expansion. This product has high workability properties for Fibrous moulding activities in Art & Decoration.It could be used to produce case and Lost Wax Processs for the production of ceramic ware or figurines for Art and Decoration
Very high strength
Fine Particle Size Distribution
Limited expansion
| Chemical Properties | |
|---|---|
| Chemical Composition | CaSO4.1/2H2O |
| Colour | white |
| Minimum gypsum purity % | 91 |
| Mechanical Properties | |
|---|---|
| Dry compressive strength (Mpa) | 45 |
| Flexural Strength (MPa) | 10 |
| Setting Parameters | |
|---|---|
| Initial setting time (minutes) | 16 |
| Linear Expansion (%) | 0.15 |
| Vicat Ring Fluidity (cm) | 19 |
| Physical Properties | |
|---|---|
| Particle Size (% weight retained) |
Trace at 200 µm 1.3% at 100 µm |
| Plaster to Water Ratio | |
|---|---|
| Plaster to Water Ratio (by weight) | 2.65:1 |
| Water to plaster ratio ( by weight) | 38% |
The recommended plaster to water ratio is between 2.45:1 and 2.80:1, with a mixing time of approx. 2 to 4 minutes.Water and Plaster must be measured carefully to ensure constant performances.The precise consistency to use will need to be adjusted to suit the individual application. Changes to plaster to water ratio will influence product performance particularly setting time and strength.
Packaging available : 25 kg
Shelf life : 6 months