Molda MC10 is a formulated plaster used in ceramics to produce working moulds for slip casting of tableware. This product is particularly suited to daily double casting when high strength is required.
Designed for Tableware
Multicasting plaster, mould life and absorption improved
High Strength
| Chemical Properties | |
|---|---|
| Chemical Composition | CaSO4.1/2H2O |
| Chemical Name | Calcium sulphate hemihydrate |
| Colour | white |
| Minimum gypsum purity % | 91 |
| Setting Parameters | |
|---|---|
| Initial setting time (minutes) | 9,5 |
| Vicat Ring Fluidity (cm) | 15 |
| Physical Properties | |
|---|---|
| Particle Size (% weight retained) |
0.05% at 200 µm 1% at 100 µm |
| Plaster to Water Ratio | |
|---|---|
| Plaster to water mix ratio (by weight) | 100/57 |
| Plaster to Water Ratio (by weight) | 1.75:1 |
| Water to plaster ratio (by weight) | 57% |
The recommended plaster to water ratio is between 1.65:1 and 1.80:1, with a mixing time of approx. 2 to 4 minutes, depending on batch size and plaster shop process.Mixing utensils should always be clean and free from set plaster. Use distilled water only. For consistent results, attention must be given to the correct proportioning and mixing of the plaster and water. Add the weighed quantity of plaster slowly into the measured volume of water and allow to soak. Do not mix fresh plaster with that which has been mixed for some time previously. Changes to plaster to water ratio will influence product performance, particularly setting time and strength and absorption capability.
Packaging available : 25 kg
Shelf life : 10 months